We’ve spent hundreds of hours researching and comparing 3.3V Relay Module of all specifications to find the best one for any need (or budget). Here are the results.
The Best 3.3V Relay Module of 2020 – Top Rated & Reviewed
2,886 Reviews Scanned
- 【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO.
- 【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load;4pcs * 2.5 mm Fixed Bolt Hole.
- 【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection.
- 【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. It is better to share the same power supply, because that is more convenient for using.
- 【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc.
- ICStation 1CH 3V 3.3V relay power switch module with optocoupler high level trigger for ESP8266 development board. 【Optocoupler Isolation】it can control high current load via low current, and replace mechanical switch.
- Use the classical and beautiful black PCB and metal components, looks cool and pleasure to the eyes, which will show your whole DIY project superior. 2pcs with the independent anti-static packing. Size: 50x26x17mm/1.97x1.02x0.67inch, Voltage: 3V-3.3V, Current: <200mA (operating); <5mA (trigger). Operating Temperature: -25~85 Celsius.
- 【Load Capacity】7A, 240V AC; 10A 120V AC; 10A 28V DC. Please do not go beyond the voltage or current, or it will burn the relay contact. Load wire is fenestrate processed, if it is tin plated, it can bear high current (please pay attention to the insulation).
- 【Interface】 Input: VCC, GND, IN; Load Port: Normal Close, Common, Normal Open. 【Wiring】(1) VCC connects DC 3.3V positive; (2) GND connects DC 3.3V negative; (3) IN connects main control equipment input port, such as MCU, sensor output port (0 and 1, you can adjust via the switch on your own); (4) Please note that the power cannot be reversely connected, or it will burn the module.
- Connect the power; when push the switch to L, IN port will input low level, and relay will operate, S lamp will be on. If COM and NO are connected; when input high level, the relay will release, and S lamp will be off. If COM and NO are disconnected, it becomes connection between COM and NC. If push the switch to H, and not use the relay, NC and COM are connected.
- 1 channel 3V/3.3V power relay mdoule support photocoupler isolation control;Support dual power supply input ensure high anti-iinterference ability
- Fast response time less than 20ms and longlife time up to 100,000 times snap action
- On-board signal output indicator, wire terminal and installing holescompatible with 10A 250VAC and 10A 30VDC load
- Module Size: 70mmX17mmX20mm / 2.76X0.70X0.79 inch (L*W*H)
- Relay Module: SRD-DC03V-SL-C;Channel: 1 channel;Working Voltage: DC 3-3.3V;Compatible Load: 10A 250VAC / 10A 30VDC;Single Socket Length: 7.5mm
- 5V 8-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equipped with high-current relay, AC250V 10A ; DC30V 11A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP432, TTL logic)
- Indication LED's for Relay output status
- 【Opto-isolator Control】Our 3v 1 channel relay module supports photocoupler isolation control, has the output signal indicator,the signal input port can connect SCM IO port, high level signal drive. Strong driving ability, stable performance.
- 【Dual Power Option Design】Our 3V/3.3V power relay module use double power selection design that has strong anti-interference ability and high photoelectric isolation protection reliability.
- 【Diode Continuous Flow Protection】Relay module with diode continuous flow protection, response time is less than 20 milliseconds,long life of relay can be absorbed 100,000 times continuously.
- 【30VDC 250VAC Load】Equiped with high-current relay, AC250V 10A ; DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
- 【Safer & More Solid】 The external connection adopts rotary compression terminal to make the connection stronger.
- The relay can directly control a variety of equipment and loads, which meets international safety standards, and also has power and relay indicators.
- This relay can be used not only as a microcontroller development board module, but also as a home appliance controller.
- No need to buy the Jumper Wires extra, this set contains 20cm 10Pin female to female, female to male, male to male Dupont Jumper Wires, with which you can easier to complete the project.
- 12V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equipped with high-current relay, AC250V 10A ; DC30V 12A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic)
- Indication LED's for Relay output status
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design, even if the control line is broken, the relay will not move.
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
- The Module can be set by jumper high or low trigger.
- 1. 3V 1-Channel Relay interface board support photocoupler isolation control,has the output signal indicator,the signal input port can connect SCM IO port, high level signal drive
- 2. Support dual power supply input ensure high anti-interference ability,high reliability of photoelectric isolation protection
- 3. With diode continuous flow protection,response time is less than 20 milliseconds,long life of relay can be absorbed 100,000 times continuously
- 4. The external connection uses the rotary crimping terminal, causes the wiring to be more solid.
- 5. Equiped with high-current relay, AC250V 10A ; DC30V 10A,each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
Last update on 2020-11-10 / Affiliate links / Product Titles, Images and Descriptions from Amazon Product Advertising API
Top Rated 3.3V Relay Module to Buy Now
Why You Should Buy Best 3.3V Relay Module from Amazon
Amazon is not the only store that sell 3.3V Relay Module. However, there are several compelling reasons why you should buy 3.3V Relay Module from them, with the suitable Price and Reviews. Here are five:
(1) Amazon Makes Shopping 3.3V Relay Module Personal
Amazon is very good at making recommendations of 3.3V Relay Module based on your search history. From time to time, they will even show you discounted prices on 3.3V Relay Module that you previously expressed an interest in. They also make your shopping experience a little easier by showing you items that you recently viewed.
(2) Amazon Checkout is Easy
Amazon checkout is easy, especially if you already have an account. You can add 3.3V Relay Module to your cart and go through a multi-step checkout process, or you can buy 3.3V Relay Module with only one click by using your stored credit card information.
(3) Amazon Has Lots of Social Proof
Before you make a purchase for 3.3V Relay Module, you want to know that the company you are dealing with is legitimate and that others trust the company enough to make a purchase. You may also like to read what others are saying about the product in the review section. Amazon does all of this quite well.
(4) Amazon Has Great 3.3V Relay Module Images and Descriptions
In addition to still images, many of Amazon’s 3.3V Relay Module have videos. This makes it easier for you to see exactly what you are purchasing. Amazon’s 3.3V Relay Module descriptions are also quite good. In many cases, Amazon repeats the descriptions furnished by the manufacturer. In other cases, they write their own.
(5) The Amazon Site is Easy to Navigate
Navigating the Amazon site is easy. Even though the site is huge, you will not feel overwhelmed when searching for 3.3V Relay Module. This is partly due to Amazon’s filtering process. You can search for items by brand, price or user rating. You can also search for specific features.
How to Choose the Best 3.3V Relay Module (with Price and Reviews)
Although most 3.3V Relay Module are similar, there are several differences worth noting. Here are nine criteria to consider when choosing an 3.3V Relay Module:
(1) 3.3V Relay Module Price and Reviews
Although price is not the only factor to consider, it is nevertheless extremely important. The price of an 3.3V Relay Module should be in line with its value. You can compare 3.3V Relay Module reviews to make sure you are getting a fair price. This is easy to do on Amazon.
The demand for a particular 3.3V Relay Module is a good indication of its ability to perform the functions for which it was designed. If a product has been around for a while and still has a high demand, it is likely a good product.
3.3V Relay Module materials differ from manufacturer to manufacturer. Consider where and how you will be using your 3.3V Relay Module to determine if one material would be better than another.
Like most products, 3.3V Relay Modules come in various sizes. Do you need a large 3.3V Relay Moduleor a small one? Think about where you will use your 3.3V Relay Module in order to determine the best size. You can also read the customer reviews on Amazon to see what others are saying about the size of the unit they purchased.
3.3V Relay Modules also come in a variety of colors. Do you need a particular color? You should also consider whether the color of your 3.3V Relay Module would have any effect on the efficiency of its operation.
The durability of an 3.3V Relay Module will be contingent on the materials used as well as the quality of the manufacturing process. Additionally, the type of 3.3V Relay Module you purchase may affect its durability.
Will you need to store your 3.3V Relay Module? If so, you should consider the size and weight of the 3.3V Relay Moduleto make sure that it can be stored properly. Also, give some consideration to the type of climate in which your 3.3V Relay Module will be stored.
(8) Customer Ratings
Customer rating is one of the best criteria for choosing an 3.3V Relay Module. It is hard to know exactly how an 3.3V Relay Module will perform until you get it home and try it out.
Make sure the 3.3V Relay Module you are considering is backed by a good manufacturer’s warranty. If it isn’t, you might be better off with another ones.