We’ve spent hundreds of hours researching and comparing 3D Printer Lighting of all specifications to find the best one for any need (or budget). Here are the results.

The Best 3D Printer Lighting of 2020 – Top Rated & Reviewed

2,882 Reviews Scanned

Rank No. #1
Tresbro Led Light for 3D Printer, Ultra-Thin Led Lamp Bar 8.8'5V with USB Interface, Removable Magnets Design, with 3 Colors 10 Brightness Levels, Suitable for Ender3/3Pro/3V2/5,Cr-10/10S/10 S4/10 V2
  • 【Easy Installation】:No need to drill or weld on the wall, easy to install. The magnets attached to both ends of the lamp allow you to remove or reinstall the lamp at any time. The entire installation process can be completed in less than two minutes. The latest upgrade: 2 extra cable ties (color random: black / white ) are included to fix the light bar. From now on, you don’t have to worry about the light bar falling and destroying your precious prints.
  • 【Dimmable Design & EYE CARE】:3 color modes x 10 brightness levels. With flicker-free & zero-radiation soft light, this lamp is professional for eye protection. Your eyes will not feel exhausted even after a long use of it.
  • 【More Convenient】:The installation of the printing lamp makes your printing area no longer dark. Whenever you need to check the printing work and printing progress, you only need to walk to the printer to turn on the lamp and adjust to the brightness, color and angle you want. You can observe your carefully printed 3D works in 360° without dead ends, and the whole process is very convenient and fast.
  • 【Energy Saving & USB Rechargeable】: High quality Ender 3 printer LED light bar produce bright light with low energy consumption, power saving and more safer. The USB interface with a power adapter,which provides multiple charging methods, like power bank, phone charger,PC,laptop,wall socket etc.
  • 【Wide Application】:This upgraded version of the LED strip has a moderate size, can be adapted to almost all general-purpose printers on the market. more importantly, it not only suitable for 3D printer, but also for any other place that needs lighting, such as bedroom, wardrobe, bathroom, cabinet, kitchen cabinet, bookcase, corridor, staircase. Perfect for many occasions like reading, sleeping, working, studying and more.
Rank No. #2
[Gulfcoast Robotics] 24V Premium White LED Light Upgrade for Creality Ender 3 / Ender 3 Pro 3D Printer
  • NOT Compatible with Ender 3 V2 (Use ASIN: B08LT2JKRS)
  • Complete LED Lighting Kit for the Creality Ender 3 and Ender 3 PRO
  • Easy Installation - Takes less than 5 minutes to setup and use
  • No Soldering Required - XT60 pass through connector plugs in to the existing Power Supply cable
  • Dial Based Dimmer Switch - Control the brightness or turn off the LEDs
Rank No. #3
Monoprice Maker Ultimate 2 3D Printer - with (200 x 150 x 150 mm) Heated and Removable Glass Built Plate, Auto Bed Leveling, Internal Lighting & Built-in Filament Detector
  • AUTO BED LEVELING: Eliminate the hassles of bed leveling with screws and springs. The built-in inductive sensor can automatically level the print bed, saving you times and aggravation. let makes the print bed absolutely level, ensuring that the first print layers is properly adhere to the build plate. Additionally, each printer is pre-levelled at factory before it ships.
  • HEATED AND REMOVABLE GLASS BUILD PLATE: The glass build plate provides the flattest surface possible, ensuring that the first print layers are flawless. The build plate can be heated to 100C, which helps first layer adhesion with materials such as ASA and ABS.
  • FILAMENT DETECTOR: With the Ultimate 2, you have no need to worry about running out of filament in the middle of a print. The built-in filament sensor detects when the filament has been consumed and automatically pauses the print, allowing you to load a fresh spool of filament to finish your print. Maximum Power Consumption is 200 watts
  • FULLY ENCLOSED: Environmental factors can cause prints to curl, split, or otherwise fail, especially when working with more temperature sensitive filaments. The full enclosure helps maintain internal temperatures, ensuring that drafts, air conditioning, and other environmental factors have no effect on the print.
  • INTERNAL LIGHTING: The full enclosure has the negative effect of making it more difficult to see your print, without using a flashlight or other spot lighting. The Ultimate 2 features a row of LED lights inside the enclosure, allowing you to easily monitor your print.
Rank No. #4
LONGER Orange 10 Resin SLA 3D Printer with Parallel LED Lighting, 3.86' x 2.17 x 5.5' Printing Size, Temperature Warning
  • 【SLA 3D Printer】Entry-level UV light curing LCD 3D printer. Machine preassembled and easy setup. Rapid prototyping with high precision details. LCD printers have higher precision than FDM printers.
  • 【24 Parallel LED Lighting】Compare to other printers(4 spotlights), this 3d printer uses 24 parallel LED lights. Improved printing quality, curing speed and substrate adhesion with parallel LED lighting and uniform lighting intensity distribution.
  • 【Smart and Fast Slicing】LONGER self-developed slicing software. Output 100M slicing file in 1 minute, 3 times faster. Smart support generation in one-click, enhanced cross-link structure. Also supported by CHITUBOX.
  • 【Easy to Use】Full color touch screen, preview and monitor print status in real-time. Easy leveling. Full metal body, Robust adhesion. Safety temperature warning system.
  • 【Warranty and Service】NOTE: The printer comes without resin. 12-Month machine warranty (4.5'' LCD Screen and FEP film excluded) and Lifetime Technical Support. High-efficiency and considerate community support on Facebook.
Rank No. #5
inShareplus 24V 2.5A 60W, DC Universal Regulated Switching Power Supply, Converter AC 100-240V to DC 24 Volt LED Driver, Transformer,Adapter for LED Strip Light, 3D Printer, Computer Project, CCTV
  • Universal Input: 100-240V AC; Output: 24V DC 2.5A
  • Widely used in Industrial automation, LED display, CCTV, Radio, Computer Project, LED Strip Lights, 3D Printer etc.
  • Circuit Short Protection, Overload Protection and Over Voltage Protection Ensures the Safety of Using This Power Supply
  • Metal Enclosed Body is good for Heat Dissipation which Can Prolong the Lifespan of the Power Supply
  • Dual input voltage: AC 110V/220V. There is a switch, choose the proper voltage before use. Please set the switch to 110V for USA.
Rank No. #6
LONGER Orange 30 3D Printer, 2K Resin 3D Printer, Parallel LED Lighting, 4.72"x2.68"x6.69" Large Printing Size, Off-line Printing
  • 【High Precision & Larger Printing Size】Orange 30 is a higher precision resin 3d printer, with built-in 2k LCD screen at 2560x1440 resolution and 47.25µm pixel size, offering bigger size of printing at 4.72 x 2.68x 6.69 inches; Improved solid linear guide and special slider design to enhance the accuracy and stability of Z axis.
  • 【Uniform Matrix UV Lighting】Integrated with matrix UV LED arrays, Orange 30 provides better printing performance since the matrix illumination provides better uniformity, higher intensity and shorter time of curing.
  • 【Easy Operation & Fast Slicing】 Full color touch screen. Real-time printing status preview. Easy leveling. Upgraded trough with scale, more convenient. LONGER self-developed slicing software, output 100M slicing file in 1 minute, 3 times faster. Smart support generation in one-click. Also supported by CHITUBOX.
  • 【Fast Cooling & High Temperature Warning System】Temperature detection system included. The system will stop printing when temperature is too high. Equipped with high efficiency cooling system to improve lifespan of this 3D printer.
  • 【Warranty and Service】NOTE: The printer comes without resin. 12-Month machine warranty and Lifetime Technical Support. High-efficiency and considerate community support on Facebook.
Rank No. #7
[Gulfcoast Robotics] Premium White LED Light Upgrade for Ender 3 V2 CR10 Universal 3D Printers
  • Universal LED Lighting Kit is compatible with most 3D Printers (see description)
  • Simple Installation takes less than 5 minutes. It bolts on and plugs in!
  • Modular wall adapter powers the LED Lighting Kit separately from the 3D Printer
  • Dial Based Dimmer Switch - Control the brightness or turn off the LEDs
  • Original Ender 3 / Ender 3 Pro owners should use ASIN: B07SHYPRCP
Rank No. #8
BCZAMD 3D Printing Upgrade Accessory 312MM Length White LED Lighting Kit Integrated Switching Wire Applicable at Night Compatible with Printer Creality Ender 3 / Ender 3 Pro CR10 CR10S Series
  • Complete LED Lighting Kit for CR-10/CR-10S/Ender-3/Ender-3 pro/Ender-3 v2 , for more convenient printing at night, widely used.
  • Easy to install, just need you spend a few minutes to setup and start to use.
  • A plug and play device, connected to the power supply by the position of the alignment hole
  • Multi - specification switch plug, compatible with Australian code, European code, British code socket
  • Gentle beam, no Glaring,  protect your eyes even long-term use
Rank No. #9
Ultra Thin LED Under Cabinet/Counter Kitchen Lighting Plug-in, Dimmable 2 Coin Thickness LED Light with 42 LEDs, Daylight White Easy Installation 12V/1A 10W/900LM CRI90, 2 Pack, All in Kit
  • Easy to be Hidden: The thickness of under cabinet light is just 0.27inch/7mm, only 2 coin thickness. YOU COULD ALMOST PUT IT IN ANYWHERE. 3M adhesive tape Can Stick To Any Non-greasy Surface without any mounting brackets and screws, so it won't fall off easily. WARM TIPs: The 3M adhesive tapes are hard to be removed once stick on, so please carefully choose where to stick 🙂
  • Plug & Play: Just simply connect them to start using! You can set any brightness level according to your preference via its switch dimmer.
  • More Economical and Brighter: With a low energy consumption of 5W/450LM which can replace 12W fluorescent tube, the under cabinet lights COULD SAVE 50% OF ENERGY. CRI>90, shows natural colors brighter, color temperature is 6000K, MAKES YOU FEEL RELAX AND MORE COMFORTABLE!
  • Outstanding Quality: The lamp body of under cabinet lighting is made of high-quality aluminum material. Not only the under cabinet lighting is durable, but also brings excellent heat dissipation, SO YOU COULD KEEP IT ON ALL DAY LONG!
  • Wide Application: LED under cabinet lights are perfect for kitchen, cabinet, bookcase, bathroom lens headlight, counters, basement, cosmetics, jewelry display case, .etc.
Rank No. #10
Creality Ender 3 Serial LED Light Kit 6500K White, Premium LED Light Bar Buckles Design for Sovol SV01 SV02 Creality Ender 3 Serial Ender 5 Serial CR Serial 3D Printer
  • [Creality Authentic] - 100% Creality original new product for Creality Ender 3 Ender 3 Pro Ender 3 V2 Ender 5 Ender 5 pro Ender 5 plus CR-10 CR-10S CR-10 v2 CR-20 CR-X CR-6 SE Sovol SV01 SV02 SV03 3D Printer.
  • [Easy Installation] - No need to drill or weld on the wall, easy to install with buckles. The entire installation process can be completed in less than two minutes.
  • [High Color Rendering Index & Eye Care] - Soft LED light and no strobe, your eyes will not feel exhausted even after a long-term use. 6500k color temperature is close to the natural light as far as possible, the color rendering index is greater than 90Ra with bright light.
  • [No Worries to Print in Night] - Equipped with an independent power socket, the LED lamp is installed on the gantry. When the light is not sufficient, the external LED light assists you to finish the 3D printing.
  • [Energy Saving & Universal Plug Adaptor] - High quality Ender 3 printer LED light bar produce bright light with low energy consumption, power saving and more safer. Universal plug adaptor is suitable for American, European and British standard. Essential for business trip and traval abroad.

Last update on 2021-05-12 / Affiliate links / Product Titles, Images and Descriptions from Amazon Product Advertising API

Top Rated 3D Printer Lighting to Buy Now

 

Why You Should Buy Best 3D Printer Lighting from Amazon

Amazon is not the only store that sell 3D Printer Lighting. However, there are several compelling reasons why you should buy 3D Printer Lighting from them, with the suitable Price and Reviews. Here are five:

(1) Amazon Makes Shopping 3D Printer Lighting Personal

Amazon is very good at making recommendations of 3D Printer Lighting based on your search history. From time to time, they will even show you discounted prices on 3D Printer Lighting that you previously expressed an interest in. They also make your shopping experience a little easier by showing you items that you recently viewed.

(2) Amazon Checkout is Easy

Amazon checkout is easy, especially if you already have an account. You can add 3D Printer Lighting to your cart and go through a multi-step checkout process, or you can buy 3D Printer Lighting with only one click by using your stored credit card information.

(3) Amazon Has Lots of Social Proof

Before you make a purchase for 3D Printer Lighting, you want to know that the company you are dealing with is legitimate and that others trust the company enough to make a purchase. You may also like to read what others are saying about the product in the review section. Amazon does all of this quite well.

(4) Amazon Has Great 3D Printer Lighting Images and Descriptions

In addition to still images, many of Amazon’s 3D Printer Lighting have videos. This makes it easier for you to see exactly what you are purchasing. Amazon’s 3D Printer Lighting descriptions are also quite good. In many cases, Amazon repeats the descriptions furnished by the manufacturer. In other cases, they write their own.

(5) The Amazon Site is Easy to Navigate

Navigating the Amazon site is easy. Even though the site is huge, you will not feel overwhelmed when searching for 3D Printer Lighting. This is partly due to Amazon’s filtering process. You can search for items by brand, price or user rating. You can also search for specific features.

How to Choose the Best 3D Printer Lighting (with Price and Reviews)

Although most 3D Printer Lighting are similar, there are several differences worth noting. Here are nine criteria to consider when choosing an 3D Printer Lighting:

(1) 3D Printer Lighting Price and Reviews

Although price is not the only factor to consider, it is nevertheless extremely important. The price of an 3D Printer Lighting should be in line with its value. You can compare 3D Printer Lighting reviews to make sure you are getting a fair price. This is easy to do on Amazon.

(2) Demand

The demand for a particular 3D Printer Lighting is a good indication of its ability to perform the functions for which it was designed. If a product has been around for a while and still has a high demand, it is likely a good product.

(3) Material

3D Printer Lighting materials differ from manufacturer to manufacturer. Consider where and how you will be using your 3D Printer Lighting to determine if one material would be better than another.

(4) Size

Like most products, 3D Printer Lightings come in various sizes. Do you need a large 3D Printer Lightingor a small one? Think about where you will use your 3D Printer Lighting in order to determine the best size. You can also read the customer reviews on Amazon to see what others are saying about the size of the unit they purchased.

(5) Color

3D Printer Lightings also come in a variety of colors. Do you need a particular color? You should also consider whether the color of your 3D Printer Lighting would have any effect on the efficiency of its operation.

(6) Durability

The durability of an 3D Printer Lighting will be contingent on the materials used as well as the quality of the manufacturing process. Additionally, the type of 3D Printer Lighting you purchase may affect its durability.

(7) Storage

Will you need to store your 3D Printer Lighting? If so, you should consider the size and weight of the 3D Printer Lightingto make sure that it can be stored properly. Also, give some consideration to the type of climate in which your 3D Printer Lighting will be stored.

(8) Customer Ratings

Customer rating is one of the best criteria for choosing an 3D Printer Lighting. It is hard to know exactly how an 3D Printer Lighting will perform until you get it home and try it out.

(9) Warranty

Make sure the 3D Printer Lighting you are considering is backed by a good manufacturer’s warranty. If it isn’t, you might be better off with another ones.