We’ve spent hundreds of hours researching and comparing A8 Auto Leveling of all specifications to find the best one for any need (or budget). Here are the results.

The Best A8 Auto Leveling of 2020 – Top Rated & Reviewed

2,253 Reviews Scanned

Rank No. #1
Redrex Auto Leveling Sensor 3D Touch Probe V3.0 Upgrading Parts for ANET A8,CR10 Series,Ender 3 Series and Other DIY 3D Printers
  • NOTE:This 3D Touch has the same function with BL Touch ,except for some cable color difference.Please pay attention to the cables when installing this kits.
  • Upgrading Bed Leveling kits:3D Touch is an auto leveling sensor for most open-source 3d printers.Such as ANET A8,CR10 and Ender 3 series,ANYCUBIC i3 Mega,Geeetech A10.
  • Easy Installation:Like most other auto leveling sensors,this 3D Touch is easy to install on 3d printer,there are many STLs in thingiverse.com
  • Intelligence, self - check and alarm. Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
Rank No. #2
UEETEK Auto Leveling Position Sensor Kit for Anet A8 Prusa i3 3D Printer
  • Adoption of high quality material, it is durable and long lasting use. It works well with Anet A8 3D printer. Pretty solution for auto-adjusting heatbed level, convenient for use. Comes withmounting plate and pre soldered connector so no wiring is needed. Just unplug the original z stop and plug in sensor and screw into the back of printer.
  • Works well with Anet A8 3D printer.
  • Pretty solution for auto-adjusting heatbed level, convenient for use.
  • Comes withmounting plate and pre soldered connector so no wiring is needed. Just unplug the original z stop and plug in sensor and screw into the back of printer.
  • Package size: About 10 x 10 x 3cm/3.9 x 3.9 x 1.2inch(LxWxH).
Rank No. #3
UniTak3D 3D Touch Probe V3.0 Auto Leveling Sensor Upgrading Parts for ANET A8,CR10 Series,Ender 3 Series and Other DIY 3D Printers
  • Easy to Install:Like most other auto leveling sensors,this 3D Touch is easy to install on 3d printer,there are many STLs in thingiverse.com
Rank No. #4
Auto Leveling Position Sensor Kit for Anet A8 Prusa I3 3D Printer RepRap
  • Works well with Anet A8 3D printer.
  • Pretty solution for auto-adjusting heatbed level, convenient for use.
  • 3D printer waterproof anti-jamming DC three-wire npn,10-30V DC working voltage.
  • Anti-jamming three-wire, 140cm / 55.1in cable length.
  • Comes with mounting plate and pre soldered connector so no wiring is needed, just unplug the z stop and plug in sensor and screw into the back of printer.
Rank No. #5
3D Touch Sensor Auto Bed Leveling Sensor for Creality Ender 3 Series and CR10 Series, Geeetech Printers, Anet A8, Anycubic I3 Mega etc.
  • ✔✔✔Please see detailed User Manual in the Description Section✔✔✔
  • ♥It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • ♥ [Note] Pulling/pushing hard on the push-pin can damage Touch sensor and make it less accurate
  • 【Most issues from this probe are caused by improper setting-up】If you have any question to get this probe working, feel free to ask us for help.
Rank No. #6
URBEST 8mm Detecting Distance Approach Sensor Inductive Proximity Switch NPN NO DC 6-36V Cylinder Type
  • Item Name : Inductive Proximity Switch; Model : LJ18A3-8-Z/BX; Package Qty: 1 Piece Switch
  • Wire Type : DC 3 Wire Type (Black, Brown, Blue);Switch Appearance Type : Cylinder Type; Material : Plastic, Alloy;
  • Theory : Inductive Sensor; Output Type: NPN NO(Normal Open);Diameter of Head : 18mm;Detecting Distance : 8mm
  • Supply Voltage : DC 6-36V;Current Output : 300mA;Detect Object : Iron;
  • Operating Temperature : -25C to +55C (Non-freezing Condition);Size : 7 x 3cm/2.8'' x 1.2'' (L*Max. Dia);Cable Length : 103cm / 40.55"
Rank No. #7
FYSETC 3D Printer Leveling Parts, Heat Bed Silicone Leveling, Column OD 0.63 in ID 0.16 in Stable Hot Bed Tool Heat-Resistant Silicone Buffer for Anet A8 Wanhao D9 Prusa i3 Mega,4 Pack Black
  • For 3D Printer Hot Bed/ Platform, bottom connect, can replace original spring leveling.
  • New upgraded 3d printing leveling tool , Special design for Anet A8 Wanhao D9 Anycubic Mega i3 and most heated bed.
  • This heat-resistant and pressure-resistant silicone leveling column with a 4mm inner diameter makes it better to level your 3D printer.
  • The silicone buffers are simply installed instead of the original spring and it is no longer possible movement, your set levels remain!
  • After Sales Guarantee: each one desfective item can have the free replace or refund, need more help please feel free to email or Q&A us, we will try our best to service you.
Rank No. #8
ANTCLABS BLTouch : Auto Bed Leveling Sensor/to be a Premium 3D Printer (with 2M Extension Cable Set)
  • [Note] Firmware Update: This item requires a firmware update. Please check the manufacturer's instruction page: antclabs.com/manual.
  • BLTouch is an auto leveling sensor for 3D Printers based on open-source.
  • Simple, Smart, High-precision.
  • It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • Come with 2m extension cable set. Additional parts may be required for installation on certain printer models.
Rank No. #9
Creality BL Touch 3D Printer Upgraded Auto Bed Leveling Sensor Kit for Cr-10/Ender 3/Ender 3Pro/Ender 5/Ender 5Pro/CR 10S/CR-10 S4/S5/CR 20/20 Pro
  • 【Awesome BLTouch Upgraded Kit】Unlike the inductive probe, Our Creality BLTouch auto bed leveling kit was a touch-based 3D printer bed leveling probe which enables automatic bed leveling on your 3D printer, regardless of print surface. This touch sensor works perfectly with any surface, from glass to blue tape or woods, metals and so on.
  • 【Widely Application】Suitable for Ender-3 / Ender-3s / Ender-3 Pro / Ender 5 / Ender 5 Pro/ CR-10 / CR-10S / CR 10S4 / CR 10S5 / CR-20 / CR-20 Pro. (NOTE: Can't use for Ender 3V2, CR-10V2, CR-10 V3, CR 10S Pro) Please flash the firmware first. Use the ISP cable to flash the firmware for V1 mainboard. Use USB cable to flash for V2 Mainboard. If you have a V 4.2.2 mainboard, please download the instruction from here: https://m.media-amazon.com/images/I/C1i4W82Kq+S.pdf
  • 【Firmware】Please move to the Creality Official Website to download the firmware and flash it at first, For V1 mainboard, use isp to flash of V1.1.4 or V1.1.5 (8 bit) mainboard; For V4 mainboard, use SD to flash the new Version V4.2.2 or V4.2.7(32 bit) mainboard; For V2 mainboard, use USB to flash,The circuit wiring of CR-10S/CR-10S4/CR-10S5/CR 20 are different from the manual.
  • 【High-precision】 BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • 【Genuine High Quality Set】Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install.If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
SaleRank No. #10
3D Touch Sensor Auto Bed Leveling Sensor with Extension Cable 3D Touch Sensor for Creality Ender 3 Series and CR10 Series, Geeetech Printers, Anet A8, Anycubic I3 Mega etc.
  • ✔✔✔Please see detailed User Manual in the Description Section✔✔✔
  • ♥It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • ♥ [Note] Pulling/pushing hard on the push-pin can damage Touch sensor and make it less accurate
  • 【Most issues from this probe are caused by improper setting-up】If you have any question to get this probe working, feel free to ask us for help.

Last update on 2021-02-14 / Affiliate links / Product Titles, Images and Descriptions from Amazon Product Advertising API

Top Rated A8 Auto Leveling to Buy Now

 

Why You Should Buy Best A8 Auto Leveling from Amazon

Amazon is not the only store that sell A8 Auto Leveling. However, there are several compelling reasons why you should buy A8 Auto Leveling from them, with the suitable Price and Reviews. Here are five:

(1) Amazon Makes Shopping A8 Auto Leveling Personal

Amazon is very good at making recommendations of A8 Auto Leveling based on your search history. From time to time, they will even show you discounted prices on A8 Auto Leveling that you previously expressed an interest in. They also make your shopping experience a little easier by showing you items that you recently viewed.

(2) Amazon Checkout is Easy

Amazon checkout is easy, especially if you already have an account. You can add A8 Auto Leveling to your cart and go through a multi-step checkout process, or you can buy A8 Auto Leveling with only one click by using your stored credit card information.

(3) Amazon Has Lots of Social Proof

Before you make a purchase for A8 Auto Leveling, you want to know that the company you are dealing with is legitimate and that others trust the company enough to make a purchase. You may also like to read what others are saying about the product in the review section. Amazon does all of this quite well.

(4) Amazon Has Great A8 Auto Leveling Images and Descriptions

In addition to still images, many of Amazon’s A8 Auto Leveling have videos. This makes it easier for you to see exactly what you are purchasing. Amazon’s A8 Auto Leveling descriptions are also quite good. In many cases, Amazon repeats the descriptions furnished by the manufacturer. In other cases, they write their own.

(5) The Amazon Site is Easy to Navigate

Navigating the Amazon site is easy. Even though the site is huge, you will not feel overwhelmed when searching for A8 Auto Leveling. This is partly due to Amazon’s filtering process. You can search for items by brand, price or user rating. You can also search for specific features.

How to Choose the Best A8 Auto Leveling (with Price and Reviews)

Although most A8 Auto Leveling are similar, there are several differences worth noting. Here are nine criteria to consider when choosing an A8 Auto Leveling:

(1) A8 Auto Leveling Price and Reviews

Although price is not the only factor to consider, it is nevertheless extremely important. The price of an A8 Auto Leveling should be in line with its value. You can compare A8 Auto Leveling reviews to make sure you are getting a fair price. This is easy to do on Amazon.

(2) Demand

The demand for a particular A8 Auto Leveling is a good indication of its ability to perform the functions for which it was designed. If a product has been around for a while and still has a high demand, it is likely a good product.

(3) Material

A8 Auto Leveling materials differ from manufacturer to manufacturer. Consider where and how you will be using your A8 Auto Leveling to determine if one material would be better than another.

(4) Size

Like most products, A8 Auto Levelings come in various sizes. Do you need a large A8 Auto Levelingor a small one? Think about where you will use your A8 Auto Leveling in order to determine the best size. You can also read the customer reviews on Amazon to see what others are saying about the size of the unit they purchased.

(5) Color

A8 Auto Levelings also come in a variety of colors. Do you need a particular color? You should also consider whether the color of your A8 Auto Leveling would have any effect on the efficiency of its operation.

(6) Durability

The durability of an A8 Auto Leveling will be contingent on the materials used as well as the quality of the manufacturing process. Additionally, the type of A8 Auto Leveling you purchase may affect its durability.

(7) Storage

Will you need to store your A8 Auto Leveling? If so, you should consider the size and weight of the A8 Auto Levelingto make sure that it can be stored properly. Also, give some consideration to the type of climate in which your A8 Auto Leveling will be stored.

(8) Customer Ratings

Customer rating is one of the best criteria for choosing an A8 Auto Leveling. It is hard to know exactly how an A8 Auto Leveling will perform until you get it home and try it out.

(9) Warranty

Make sure the A8 Auto Leveling you are considering is backed by a good manufacturer’s warranty. If it isn’t, you might be better off with another ones.