We’ve spent hundreds of hours researching and comparing Anet Auto Leveling of all specifications to find the best one for any need (or budget). Here are the results.

The Best Anet Auto Leveling of 2020 – Top Rated & Reviewed

2,483 Reviews Scanned

Rank No. #1
Anet ET5X DIY 3D Printer, Auto Leveling with Resume Printing Function, 3.5 Inch LCD Color Touch Screen, Upgraded Over-Current Protection Mainboard, Large Size 11.8x11.8x15.7Inch
  • 📌【Ultra Large Print&Matrix Automatic Levelling】 300x300x400mm ultra large print volume. Auto measures 25 points across the print platform for heat bed leveling. An induction sensor can probe the bed in a grid and apply mesh-based compensation that ensures you print on a level bed every time, all without the time-consuming and labor-intensive leveling tasks.
  • 📌【Filament Sensor&Power Outage Recovery】 The filament sensor detects the filament end and sends reminders to the screen to avoid air-printing. Resume printing and recover from exactly where it left off. No worries about unexpected power outages.
  • 📌【Auto Filament Assignment&Assembled In No Time】 Automatic load and unload the filament with just a click.Pre-assembly and modular design with quick assemble in 10min. Solid Wire Connection,Distributor connector for solid wire connections.
  • 📌【Dual Z-axis, More Accurate Print&Stable Y-axis Movement】 ET5 applies dual Z-axis rods and motors to make sure the smooth and accuracy of every slight movement. Dual Y axis guideway for a more stable and level moving stage of the build platform. Intuitive Touchscreen.Colorful LCD touch screen, allowing you to control the movement of X/Y/Z axis, leveling and printing with ease.
  • 📌【Safe Designed Control Board】 You can connect your ET5 online or offline to any configuration for your convenience. You could print via SD card or USB flash drive. Self-developed industrial-grade 32bit control board with MCU STMF407. Stable operation with high precision. The mother board has thermal runaway protection. If the printer fails to detect the temperature for a certain time, it would automatically power off.
SaleRank No. #2
Anet Auto Leveling ET4 DIY 3D Printer, All Full Metal Fram with Resume Printing Function, 2.8 Inch LCD Color Touch Screen, Upgraded Over-Current Protection Mainboard,220X220X250mm
  • Filament detection that detects the filament end and sent reminder to avoid air-printing. 2.8-inch full-color touch screen for easy operation.You can upload your design and print it online or offline.
  • Resume printing and recover from exactly where it left off. No worries about unexpected power outages. Automatic load and unload the filament with touch screen.
  • 6 Screws + 3 Cables, modular design with quick assembly in 10min. Terminal pinboard design with integrated connection ports, covered wires and a more sleek appearance.
  • Industrial grade chipset that allows more accurate, fast print. Protected with safety features like overcurrent protection, overload protection, over temperature protection, pre-over-temp alarm.Precision rollers on X and Y axis which reduces printing noise and provides ultra-high print resolution.
  • Enclosed metal unibody design enables a more stable and reliable structure with compact size.Support personal turn features, including manually set up fan speed, print speed, heated bed and nozzle temperature.
Rank No. #3
Anet ET5X 3D Printer, DIY 3D Printer with Dual Z-axis Design, 25 Point Auto Leveling, Online & Offline Print, 3.5 Inch LCD Color Touch Screen, 300x300x400mm
  • 🌞【Dual Z-axis & Stable Y-axis Movement】ET5X applies dual Z-axis rods and motors to make sure the smooth and accuracy of every slight movemen, It can get a high printing speed and higher printing precision. Dual Y axis provide a guideway for a more stable and level moving stage of the build platform.
  • 🌞【Ultra Large Print】300x300x400mm ultra large print volume,you can put your big creation in small machine, and achieve more inspirations.
  • 🌞【Large Touch Screen】3.5-inch touchscreen interface with 4 kinds of languages available: English, Spanish,Frence and Chinese, clear UI with friendly interface, easy to select file printing and preview the printing status real-time
  • 🌞【Assembled In No Time】6 Screws + 3 Cables, pre-assembly and modular design with quick assemble in 30mins to 1hour. You can enjoy assembly and easy to finish them
  • 🌞【Online & Offline Print】You can connect your ET5X online or offline to any configuration for your convenience. You could upload your design and print via SD card or USB flash drive.
Rank No. #4
Auto-Leveling ET4 DIY 3D Printer, Full Aluminium Metal Fram with Resume Printing Function, 2.8 Inch LCD Color Touch Screen with Succinct UI, Upgraded Over-Current Protection Mainboard
  • Modular design with quick assembly in 10min. Save time and worry.
  • Enclosed metal unibody design enables a more stable and reliable structure with compact size.
  • Full-featured entry-level 3D printer with high-cost performance: (1)Auto-leveling frees you from time-consuming and labor-intensive leveling tasks. (2)Filament detection that detects the filament end and sent a reminder to avoid air-printing. (reminds shown on the LCD screen). (3)Resume printing and recover from exactly where it left off. No worries about unexpected power outages. (4)Automatic load and unload the filament with just a click.
  • 2.8-inch full-color touch screen for easy operation.
  • Industrial grade chipset that allows more accurate, fast print. Protected with safety features like overcurrent protection, overload protection, over temperature protection, pre-over-temp alarm.(turn off the heating switch automatically)
Rank No. #5
Redrex Auto Leveling Sensor 3D Touch Probe V3.0 Upgrading Parts for ANET A8,CR10 Series,Ender 3 Series and Other DIY 3D Printers
  • NOTE:This 3D Touch has the same function with BL Touch ,except for some cable color difference.Please pay attention to the cables when installing this kits.
  • Upgrading Bed Leveling kits:3D Touch is an auto leveling sensor for most open-source 3d printers.Such as ANET A8,CR10 and Ender 3 series,ANYCUBIC i3 Mega,Geeetech A10.
  • Easy Installation:Like most other auto leveling sensors,this 3D Touch is easy to install on 3d printer,there are many STLs in thingiverse.com
  • Intelligence, self - check and alarm. Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
Rank No. #6
UniTak3D 3D Touch Probe V3.0 Auto Leveling Sensor Upgrading Parts for ANET A8,CR10 Series,Ender 3 Series and Other DIY 3D Printers
  • Upgrading Bed Leveling Kits:3D Touch is an auto bed leveling sensor for most open-source 3D printers.Such as ANET A8,CR10 and Ender 3 series,ANYCUBIC i3 Mega,Geeetech A10.
  • Smart and Precise Sentor:The 3D Touch could work with nearly any kind of bed materials,such as glasses,PCB,metals and so on.
  • Easy Installation:Like most other auto leveling sensors,this 3D Touch is easy to install on 3d printer,there are many STLs in thingiverse.com
  • Intelligence, self - check and alarm. Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • NOTE:This 3D Touch has the same function with original ,except for some cable color difference.Please pay attention to the cables when installing this kits. If the 3D Touch doesn't work properly,please refer to this web : www.antclabs.com/wiring3;Firmware Link:https://www.creality.com/download/
Rank No. #7
UEETEK Auto Leveling Position Sensor Kit for Anet A8 Prusa i3 3D Printer
  • Adoption of high quality material, it is durable and long lasting use. It works well with Anet A8 3D printer. Pretty solution for auto-adjusting heatbed level, convenient for use. Comes withmounting plate and pre soldered connector so no wiring is needed. Just unplug the original z stop and plug in sensor and screw into the back of printer.
  • Works well with Anet A8 3D printer.
  • Pretty solution for auto-adjusting heatbed level, convenient for use.
  • Comes withmounting plate and pre soldered connector so no wiring is needed. Just unplug the original z stop and plug in sensor and screw into the back of printer.
  • Package size: About 10 x 10 x 3cm/3.9 x 3.9 x 1.2inch(LxWxH).
Rank No. #8
Tegg 4PCS M3 Screw Knob Leveling Spring Component for 3D Printer Hot Bed/Platform
  • High Quality Material: Made of high stainless stee and brass,sturdy and durable£¬long service life.
  • Apply to 3D Printer Hot Bed / Platform, DIY models and so on.
  • Simple and Easy to install.Let your work your work simple and pleasant.
  • Size: Screw M3x48mm; Spring 5x7x20x9(IDxODxHxLaps). Knob size: 12.00x14.00mm.
  • Material: Stainless Metal, brass.Package Contents: 4 x Screw ,4 x Spring and 4 x Knob.
Rank No. #9
Auto Leveling Position Sensor Kit for Anet A8 Prusa I3 3D Printer RepRap
  • Works well with Anet A8 3D printer.
  • Pretty solution for auto-adjusting heatbed level, convenient for use.
  • 3D printer waterproof anti-jamming DC three-wire npn,10-30V DC working voltage.
  • Anti-jamming three-wire, 140cm / 55.1in cable length.
  • Comes with mounting plate and pre soldered connector so no wiring is needed, just unplug the z stop and plug in sensor and screw into the back of printer.
SaleRank No. #10
BLTouch : Auto Bed Leveling Sensor / To be a Premium 3D Printer
  • BLTouch is an auto leveling sensor for 3D Printers based on open-source.
  • Simple, Smart, High-precision.
  • It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • 3DMakerWorld is an authorized ANTCLABS reseller in the United States.

Last update on 2021-04-16 / Affiliate links / Product Titles, Images and Descriptions from Amazon Product Advertising API

Top Rated Anet Auto Leveling to Buy Now

 

Why You Should Buy Best Anet Auto Leveling from Amazon

Amazon is not the only store that sell Anet Auto Leveling. However, there are several compelling reasons why you should buy Anet Auto Leveling from them, with the suitable Price and Reviews. Here are five:

(1) Amazon Makes Shopping Anet Auto Leveling Personal

Amazon is very good at making recommendations of Anet Auto Leveling based on your search history. From time to time, they will even show you discounted prices on Anet Auto Leveling that you previously expressed an interest in. They also make your shopping experience a little easier by showing you items that you recently viewed.

(2) Amazon Checkout is Easy

Amazon checkout is easy, especially if you already have an account. You can add Anet Auto Leveling to your cart and go through a multi-step checkout process, or you can buy Anet Auto Leveling with only one click by using your stored credit card information.

(3) Amazon Has Lots of Social Proof

Before you make a purchase for Anet Auto Leveling, you want to know that the company you are dealing with is legitimate and that others trust the company enough to make a purchase. You may also like to read what others are saying about the product in the review section. Amazon does all of this quite well.

(4) Amazon Has Great Anet Auto Leveling Images and Descriptions

In addition to still images, many of Amazon’s Anet Auto Leveling have videos. This makes it easier for you to see exactly what you are purchasing. Amazon’s Anet Auto Leveling descriptions are also quite good. In many cases, Amazon repeats the descriptions furnished by the manufacturer. In other cases, they write their own.

(5) The Amazon Site is Easy to Navigate

Navigating the Amazon site is easy. Even though the site is huge, you will not feel overwhelmed when searching for Anet Auto Leveling. This is partly due to Amazon’s filtering process. You can search for items by brand, price or user rating. You can also search for specific features.

How to Choose the Best Anet Auto Leveling (with Price and Reviews)

Although most Anet Auto Leveling are similar, there are several differences worth noting. Here are nine criteria to consider when choosing an Anet Auto Leveling:

(1) Anet Auto Leveling Price and Reviews

Although price is not the only factor to consider, it is nevertheless extremely important. The price of an Anet Auto Leveling should be in line with its value. You can compare Anet Auto Leveling reviews to make sure you are getting a fair price. This is easy to do on Amazon.

(2) Demand

The demand for a particular Anet Auto Leveling is a good indication of its ability to perform the functions for which it was designed. If a product has been around for a while and still has a high demand, it is likely a good product.

(3) Material

Anet Auto Leveling materials differ from manufacturer to manufacturer. Consider where and how you will be using your Anet Auto Leveling to determine if one material would be better than another.

(4) Size

Like most products, Anet Auto Levelings come in various sizes. Do you need a large Anet Auto Levelingor a small one? Think about where you will use your Anet Auto Leveling in order to determine the best size. You can also read the customer reviews on Amazon to see what others are saying about the size of the unit they purchased.

(5) Color

Anet Auto Levelings also come in a variety of colors. Do you need a particular color? You should also consider whether the color of your Anet Auto Leveling would have any effect on the efficiency of its operation.

(6) Durability

The durability of an Anet Auto Leveling will be contingent on the materials used as well as the quality of the manufacturing process. Additionally, the type of Anet Auto Leveling you purchase may affect its durability.

(7) Storage

Will you need to store your Anet Auto Leveling? If so, you should consider the size and weight of the Anet Auto Levelingto make sure that it can be stored properly. Also, give some consideration to the type of climate in which your Anet Auto Leveling will be stored.

(8) Customer Ratings

Customer rating is one of the best criteria for choosing an Anet Auto Leveling. It is hard to know exactly how an Anet Auto Leveling will perform until you get it home and try it out.

(9) Warranty

Make sure the Anet Auto Leveling you are considering is backed by a good manufacturer’s warranty. If it isn’t, you might be better off with another ones.