We’ve spent hundreds of hours researching and comparing Arduino Ir Reciever of all specifications to find the best one for any need (or budget). Here are the results.

The Best Arduino Ir Reciever of 2020 – Top Rated & Reviewed

2,296 Reviews Scanned

Rank No. #1
Gikfun Digital 38khz Ir Receiver Ir Transmitter Sensor Module Kit for Arduino (Pack of 3 Sets) EK8477
  • Note: The white smudge is not corrosion damage, it's flux, can wipe it off with a rag, does not affect the use of the module
  • This ir transmitter sensor module is directly launched by a single tube, it requires waveform modulation through the program.
  • It is suitable for infrared communication, infrared remote control, apply to a variety of platforms including Arduino/51/AVR/ARM
  • With signal indicating LED, easy to observe and debug.
  • Pin Definitions: (1) Output (2) Vcc (3) GND
SaleRank No. #2
Gikfun Infrared Diode Led IR Emission and Receiver for Arduino (Pack of 10 Pairs) EK8460
  • 10PCS VS1838B Infrared receiver and 10PCS 5mm 940nm IR infrared Emission Tube LED Lamp
  • The ir receiver is a small design with a built-in dedicated IC that is highly resistant to interference and can withstand environmental interference.
  • The infrared diode's pin is not easy to be oxidized, it is easy to be tinned, and the solderability is good;
  • Long service life, no red storm, high reliability
  • Suitable for infrared products such as electronic toy remote control, infrared camera, infrared temperature measurement, etc.
SaleRank No. #3
KOOBOOK 2Pcs Digital 38KHz Infrared IR Receiver Sensor Module for Arduino Compatible
  • IR is widely used in remote control. With this IR receiver, the Arduino project is able to receive command from any IR remoter controller if you have the right decoder.
  • It will be also easy to make your own IR controller using IR transmitter.
  • With 1838 remote control receiver, the sensitivity is high.
  • Operating voltage 5V, digital output, with data indicator.
  • 2 fixing holes for easy installation, aperture 3.1mm, PCB size: 23.5*21.5mm.
SaleRank No. #4
KOOBOOK 2Sets HX1838 NEC Infrared IR Wireless Remote Control Sensor Module IR Receiver Module DIY Kit for arduino
  • Sensor uses HX1838, high sensitivity.
  • Operating voltage 5V.
  • Output form: Digital output.
  • VCC: 3.3V-5V external voltage (can be directly connected to the 5v microcontroller and 3.3v microcontroller).GND: external GND.IN: external microcontroller I/O port, I/O port has been designed 10K pull-up resistor.
  • Kit theory test distance of about 5-8 meters, but the practical application depends on the ambient factors you use, as well as the middle barrier (such as diaphragm, glass, obstructions or other material blocking), receiving head with HX1838 with power work instructions lights, receive 38K frequency any remote coding data.
Rank No. #5
DAOKI IR Infrared Wireless Remote Control Kits Sensor Board 38KHZ for Arduino AVR PIC
  • Arduino mini infrared wireless remote control kit consists of ultra-thin infrared remote control and 38KHz infrared receiver module.
  • IR receiver module can receive standard 38KHz modulation remote control signal. You can decode the remote control signal through Arduino programming.
  • This mini slim infrared remote control with 20 function keys. Its transmit distances up to 8 meters. Ideal for handling a variety of equipment indoors.
  • You can design a variety of remote control robots and interactive works.
Rank No. #6
KOOBOOK 2Pcs Infrared IR Wireless Remote Control Sensor Module Kits for Arduino(Remote Control + Receiver Board)
  • Arduino suite by ultrathin Mini infrared wireless remote control infrared remote control and 38 KHZ infrared receiving module.
  • The Mini ultra-thin has 17 function keys, the infrared emission furthest distance up to 8 meters.
  • Very suitable for indoor control devices of all kinds.
  • Infrared remote control receiving module can receive standard 38 KHZ modulation signals.
  • By means of programming the Arduino, the remote control signal decoding operation can be realized, which can produce all kinds of remote control robots and interactive work.
Rank No. #7
Dorhea 4Pcs Digital 38khz Ir Receiver Sensor Module + 4Pcs 38khz Ir Transmitter Sensor Module Kit for Ardu ino Electronic Building Block
  • The infrared transmitter module is directly transmitted by a single tube, and the waveform needs to be modulated by the program.
  • Adopt 1838 remote control receiver with high sensitivity.
  • with the emission signal indicator LED, easy to observe and debug.
  • Can be used for remoter control,Can be compatible with wrobot digital 38KHz IR transmitter sensor.
  • Widely used in infrared communication, infrared remote control, apply to a variety of platforms including Arduino/Raspberry pi/51/AVR/ARM.
Rank No. #8
Herfair IR Receiver Cable -10FT Infrared Remote Control Extender Repeater Cable with 3.5mm Jack Plug for HD DVR Cisco Explorer Verizon FiOS and Other STB Set Top Boxes - 2 Pack
  • ★ PLUG AND PLAY–Our IR extender cable is easy to install and use. Just plug the 3.5mm jack into an IR input port of the device.
  • ★ UNIVERSAL COMPATIBILITY – Suitable for a broad range of 38-56kHzinfrared devices with an IR input port and remote control such as AV equipment and cable STB boxes.
  • ★ 10FT CABLE – 10 feet LongCable with 3.5mm plug allows you to extend the signal receiver to a suitable position.
  • ★ CLEAN LOOK:Our IR Repeater system is ideal for those who want to conceal their A/V component equipment inside a closet or cabinet for a clean, stylish look.
  • ★ FLEXIBLE+ RISK-FREE PURCHASE–You can now control your home theater, cable boxes, etc. from behind thecabinet, closet or even the other room. If for any reason, you are not 100% satisfied with the product, you can send it back to us, and we will refund your money! DON’T CHECK THE NEXT LISTING! JUST ORDER NOW!!!
Rank No. #9
Gikfun 5mm 940nm LEDs Infrared Emitter and IR Receiver Diode for Arduino (Pack of 20pcs) EK8443
  • Infrared diodes are characterized by strong structure, corrosion resistance, high reliability and long life.
  • 5003MD is a high speed and high sensitive PIN
  • photodiode in a standard 5Φ plastic package.
  • The device is matched to infrared emitting diode.
  • Infrared emitter can be used for ordinary electronic devices, such as office equipment, communication equipment, and house decoration.
Rank No. #10
Stemedu HC-SR501 PIR Sensor Infrared IR Body Motion Module for Arduino Raspberry Pi(Pack of 5pcs)
  • 🚩 This HC-SR501 PIR motion sensor can turn on devices by detected motion. Automatically and quickly open various types of incandescent, fluorescent lamps, buzzer, automatic doors, electric fans, automatic washing machine and dryer Machines and other devices.
  • 🚩 Using Potentiometer 105, output timing is from 0.5S to 200S. Operating voltage range: DC 4.5-20V; Quiescent Current: <50uA; Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger)
  • 🚩 Usage: HC-SR501 can use as a hightech products. Suitable for companies, hotels, shopping malls, warehouses and family aisles, corridors. Or use for the security zone automatic lighting, lighting and alarm systems
  • 🚩 HC-SR501 Infrared PIR Motion Sensor for 3 pack: https://www.amazon.com/dp/B0897BMKR3
  • 🚩 If any question, how to contact us? Please click “Stemedu”(you can find "Sold by Stemedu" under Buy Now button), in the new page, click “Ask a question” to email us

Last update on 2021-10-11 / Affiliate links / Product Titles, Images and Descriptions from Amazon Product Advertising API

Top Rated Arduino Ir Reciever to Buy Now

 

Why You Should Buy Best Arduino Ir Reciever from Amazon

Amazon is not the only store that sell Arduino Ir Reciever. However, there are several compelling reasons why you should buy Arduino Ir Reciever from them, with the suitable Price and Reviews. Here are five:

(1) Amazon Makes Shopping Arduino Ir Reciever Personal

Amazon is very good at making recommendations of Arduino Ir Reciever based on your search history. From time to time, they will even show you discounted prices on Arduino Ir Reciever that you previously expressed an interest in. They also make your shopping experience a little easier by showing you items that you recently viewed.

(2) Amazon Checkout is Easy

Amazon checkout is easy, especially if you already have an account. You can add Arduino Ir Reciever to your cart and go through a multi-step checkout process, or you can buy Arduino Ir Reciever with only one click by using your stored credit card information.

(3) Amazon Has Lots of Social Proof

Before you make a purchase for Arduino Ir Reciever, you want to know that the company you are dealing with is legitimate and that others trust the company enough to make a purchase. You may also like to read what others are saying about the product in the review section. Amazon does all of this quite well.

(4) Amazon Has Great Arduino Ir Reciever Images and Descriptions

In addition to still images, many of Amazon’s Arduino Ir Reciever have videos. This makes it easier for you to see exactly what you are purchasing. Amazon’s Arduino Ir Reciever descriptions are also quite good. In many cases, Amazon repeats the descriptions furnished by the manufacturer. In other cases, they write their own.

(5) The Amazon Site is Easy to Navigate

Navigating the Amazon site is easy. Even though the site is huge, you will not feel overwhelmed when searching for Arduino Ir Reciever. This is partly due to Amazon’s filtering process. You can search for items by brand, price or user rating. You can also search for specific features.

How to Choose the Best Arduino Ir Reciever (with Price and Reviews)

Although most Arduino Ir Reciever are similar, there are several differences worth noting. Here are nine criteria to consider when choosing an Arduino Ir Reciever:

(1) Arduino Ir Reciever Price and Reviews

Although price is not the only factor to consider, it is nevertheless extremely important. The price of an Arduino Ir Reciever should be in line with its value. You can compare Arduino Ir Reciever reviews to make sure you are getting a fair price. This is easy to do on Amazon.

(2) Demand

The demand for a particular Arduino Ir Reciever is a good indication of its ability to perform the functions for which it was designed. If a product has been around for a while and still has a high demand, it is likely a good product.

(3) Material

Arduino Ir Reciever materials differ from manufacturer to manufacturer. Consider where and how you will be using your Arduino Ir Reciever to determine if one material would be better than another.

(4) Size

Like most products, Arduino Ir Recievers come in various sizes. Do you need a large Arduino Ir Recieveror a small one? Think about where you will use your Arduino Ir Reciever in order to determine the best size. You can also read the customer reviews on Amazon to see what others are saying about the size of the unit they purchased.

(5) Color

Arduino Ir Recievers also come in a variety of colors. Do you need a particular color? You should also consider whether the color of your Arduino Ir Reciever would have any effect on the efficiency of its operation.

(6) Durability

The durability of an Arduino Ir Reciever will be contingent on the materials used as well as the quality of the manufacturing process. Additionally, the type of Arduino Ir Reciever you purchase may affect its durability.

(7) Storage

Will you need to store your Arduino Ir Reciever? If so, you should consider the size and weight of the Arduino Ir Recieverto make sure that it can be stored properly. Also, give some consideration to the type of climate in which your Arduino Ir Reciever will be stored.

(8) Customer Ratings

Customer rating is one of the best criteria for choosing an Arduino Ir Reciever. It is hard to know exactly how an Arduino Ir Reciever will perform until you get it home and try it out.

(9) Warranty

Make sure the Arduino Ir Reciever you are considering is backed by a good manufacturer’s warranty. If it isn’t, you might be better off with another ones.