We’ve spent hundreds of hours researching and comparing Mk8 Extruder Parts of all specifications to find the best one for any need (or budget). Here are the results.

The Best Mk8 Extruder Parts of 2022 – Top Rated & Reviewed

2,927 Reviews Scanned

SaleRank No. #1
0.4MM MK8 Ender 3 Nozzles 25 pcs 3D Printer Brass Nozzles Extruder for Makerbot Creality CR-10 with 5 Needles and Metal Storage Box (0.4mm)
  • Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm; a set of 25pcs printer nozzles and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.
  • Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
  • Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs. Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother.
  • Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging.
  • Each of our kit only comes in a single size, so you can feel free mix and match!
SaleRank No. #2
Creality 3D Printer NTC Thermistor Temp Sensor 100K for Creality Ender 3 / Ender 3 Pro/Ender 5 / CR-10 / CR-10S (1m/39.4inch)
  • Use for heated bed or extruder
  • It has 2 pins female connector
  • Wire length: 1m/39.4 inches
  • Package include: 5 thermistors
  • Temperature sensor 100KΩ accuracy of ± 1%
SaleRank No. #3
Hardened Steel Nozzle 0.4 mm/ 1.75 mm 3D Printer MK8 Nozzles Tool High Temperature Wear Resistant Compatible with Makerbot, Creality CR-10 All Metal Hotend, Ender 3/ Ender3 pro, Prusa i3 (5 Pieces)
  • Durable material: MK8 extruder nozzles are made of hardened tool steel, good abrasion resistance, heat resistance and corrosion resistance, sturdy construction makes them durable to serve you for long time, suitable for 3D printing at high temperature
  • Good performance: this hardened tool steel nozzle has higher toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can print filaments of carbon fiber, fiberglass, etc.
  • High precision: the inner wall of the MK8 nozzles is smooth and has no burrs, the viscosity coefficient is small, extruder nozzle diameter error less than 0.02 mm, provide you a accurate and smooth extrusion
  • Compatibility: these 3D printer nozzles compatible with MK8 hotend for Creality 3D printers, such as Ender-2/ Ender-3/ Ender-3 pro/ Ender-5, also compatible with Creality CR-10 all-metal hotend, Prusa i3, Anet A8, Reprap, etc.
  • What you get: package comes with 5 pieces of black MK8 nozzles, the size is 0.4 mm, sufficient quantity to facilitate your timely replacement, achieving quality printing
SaleRank No. #4
Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing 1M, PTFE Teflon Tube Cutter, Pneumatic Fittings and MK8 Socks and Extra Nozzles for Ender 3/3 Pro/5 CR-10 Series/10S/20/20 Pro
  • 1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • 1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
  • 2 * PC4-M6 and PC4-M10 Pneumatic Fitting to secure PTFE in extruder and hotend.
  • 2 * MK8 hotend socks are also provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and more consistency.
  • 2*0.4mm nozzles of non-stick silicone material Help to keep the hotend temperature extremely stable.
SaleRank No. #5
Creality Capricorn Bowden Tubing 1.75mm 1M All Metal Ender 3 V2 Extruder Pneumatic Couplers Bed-Level Springs for Ender 3/Ender 3 V2/ Ender 3 Pro/Ender 5 Pro 3D Printer
  • 1*Upgraded Creality Extruder Filament Feeder 1.75mm Filament for most Creality 3d printers in the market. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
  • 1*1 Meter Original Capricorn PTFE tube with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • 1 pair- small and large pneumatic couplers to secure the bowden tube in extruder and hotend.
  • 4* bed-level springs for stiff and accurate bed leveling. NOTE: The springs are around 25mm long, which is longer than Creality ender 3,Creality ender 3 pro and Creality ender 3 v2 springs. You may use a tool to cut it to be shorter if you really like this product or adjust the hot bed to be higher to fit the springs.
  • Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2, ts extrusion gear can be replaced.
Rank No. #6
Creality 4Pcs Metal Leveling Nuts and Springs Upgraded Set for Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, CR 10 Series 3D Printer Bed Staying ​Level
  • NOTE - The length of springs are about 25mm, which is slightly longer than the ender 3 series printers(Including ender 3/ender 3 pro/ender 3 v2). The springs need to cut them shorter than the original ones in order to adapt them to the printer or adjust the hot bed to be higher to fit the springs.
  • Suitable for - Upgraded aluminum hand twist level nut are original upgraded replacement part for Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 V3,CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR 10S Pro V2, CR-10 Plus, CR-X, CR 20.
  • Metal Material - Metal material is stronger, it will twist more tightly than plastic nuts.
  • Easy to use - The torque of these nuts is large, making it easier to fine tune the hot bed.
  • Quality - Made by high quality aluminum, last much longer your stock plastic nuts.
Rank No. #7
Micro Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm
  • Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 Pro / Ender 5 / TronXY X5S
  • Orifice size: .4mm
  • Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock
  • This is a Drop in All Metal Conversion Kit for Creality printers
  • Made in USA by Micro Swiss
SaleRank No. #8
Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 / Ender 3 Pro 3D Printer
  • Fit for: Creality Ender 3, Ender 3X, Ender 3 Pro
  • Materials: Plastic
  • Operation Voltage: DC 24V
  • Weight: 0.078KG
  • Package included: DC 24V Extruder Hot End Fan and DC 24V Turbo fan
SaleRank No. #9
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover×3, 0.4mm Ender 3 Nozzle×3 and 2 Pair Pneumatic Couplers
  • It's 100% Creality Original Upgrade Assembled Extruder Hotend.
  • Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
  • With more terminal housing and pins as spare parts, in case fail installation and waste.
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
Rank No. #10
Authentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting
  • Authentic Guaranteed: The Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high performance additives, it is well regarded as the highest quality PTFE tubing in all of 3D printing.
  • Best Performance: Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend.
  • Advanced Material: Capricorn PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃.
  • Perfect Package: Package comes with two PC4-M6 fitting for extruder and two PC4-M10 fitting for hotend, one PTFE tube cutter, which can cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
  • Specifications: 1M Capricorn Bowden PTFE Tubing (1.95mm ± 0.05mm inner diameter, 2mm outer diameter). Reduces the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.

Last update on 2022-07-06 / Affiliate links / Product Titles, Images and Descriptions from Amazon Product Advertising API

Top Rated Mk8 Extruder Parts to Buy Now

 

Why You Should Buy Best Mk8 Extruder Parts from Amazon

Amazon is not the only store that sell Mk8 Extruder Parts. However, there are several compelling reasons why you should buy Mk8 Extruder Parts from them, with the suitable Price and Reviews. Here are five:

(1) Amazon Makes Shopping Mk8 Extruder Parts Personal

Amazon is very good at making recommendations of Mk8 Extruder Parts based on your search history. From time to time, they will even show you discounted prices on Mk8 Extruder Parts that you previously expressed an interest in. They also make your shopping experience a little easier by showing you items that you recently viewed.

(2) Amazon Checkout is Easy

Amazon checkout is easy, especially if you already have an account. You can add Mk8 Extruder Parts to your cart and go through a multi-step checkout process, or you can buy Mk8 Extruder Parts with only one click by using your stored credit card information.

(3) Amazon Has Lots of Social Proof

Before you make a purchase for Mk8 Extruder Parts, you want to know that the company you are dealing with is legitimate and that others trust the company enough to make a purchase. You may also like to read what others are saying about the product in the review section. Amazon does all of this quite well.

(4) Amazon Has Great Mk8 Extruder Parts Images and Descriptions

In addition to still images, many of Amazon’s Mk8 Extruder Parts have videos. This makes it easier for you to see exactly what you are purchasing. Amazon’s Mk8 Extruder Parts descriptions are also quite good. In many cases, Amazon repeats the descriptions furnished by the manufacturer. In other cases, they write their own.

(5) The Amazon Site is Easy to Navigate

Navigating the Amazon site is easy. Even though the site is huge, you will not feel overwhelmed when searching for Mk8 Extruder Parts. This is partly due to Amazon’s filtering process. You can search for items by brand, price or user rating. You can also search for specific features.

How to Choose the Best Mk8 Extruder Parts (with Price and Reviews)

Although most Mk8 Extruder Parts are similar, there are several differences worth noting. Here are nine criteria to consider when choosing an Mk8 Extruder Parts:

(1) Mk8 Extruder Parts Price and Reviews

Although price is not the only factor to consider, it is nevertheless extremely important. The price of an Mk8 Extruder Parts should be in line with its value. You can compare Mk8 Extruder Parts reviews to make sure you are getting a fair price. This is easy to do on Amazon.

(2) Demand

The demand for a particular Mk8 Extruder Parts is a good indication of its ability to perform the functions for which it was designed. If a product has been around for a while and still has a high demand, it is likely a good product.

(3) Material

Mk8 Extruder Parts materials differ from manufacturer to manufacturer. Consider where and how you will be using your Mk8 Extruder Parts to determine if one material would be better than another.

(4) Size

Like most products, Mk8 Extruder Partss come in various sizes. Do you need a large Mk8 Extruder Partsor a small one? Think about where you will use your Mk8 Extruder Parts in order to determine the best size. You can also read the customer reviews on Amazon to see what others are saying about the size of the unit they purchased.

(5) Color

Mk8 Extruder Partss also come in a variety of colors. Do you need a particular color? You should also consider whether the color of your Mk8 Extruder Parts would have any effect on the efficiency of its operation.

(6) Durability

The durability of an Mk8 Extruder Parts will be contingent on the materials used as well as the quality of the manufacturing process. Additionally, the type of Mk8 Extruder Parts you purchase may affect its durability.

(7) Storage

Will you need to store your Mk8 Extruder Parts? If so, you should consider the size and weight of the Mk8 Extruder Partsto make sure that it can be stored properly. Also, give some consideration to the type of climate in which your Mk8 Extruder Parts will be stored.

(8) Customer Ratings

Customer rating is one of the best criteria for choosing an Mk8 Extruder Parts. It is hard to know exactly how an Mk8 Extruder Parts will perform until you get it home and try it out.

(9) Warranty

Make sure the Mk8 Extruder Parts you are considering is backed by a good manufacturer’s warranty. If it isn’t, you might be better off with another ones.