We’ve spent hundreds of hours researching and comparing Mks Gen V1.3 of all specifications to find the best one for any need (or budget). Here are the results.

The Best Mks Gen V1.3 of 2020 – Top Rated & Reviewed

2,245 Reviews Scanned

Rank No. #1
BIGTREETECH 3D Printer Part Stepstick Mute TMC2208 V3.0 Stepper Motor Driver with Heatsink for SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 3D Printer Control Board(Pack of 5pcs) (UART Mode)
  • ❤【High Compatibility 】 BIGTREETECH TMC2208 stepstick can be compatible with popular mother boards like SKR V1.3/SKR 1.4 Turbo,OctopusAnycubic I3 Mega board.
  • ❤【Avoid Losing Steps and Without Jittering 】 spreadCycle:The motor controlled by the PWM chopper mode operated more smoothly and avoid losing steps and Jittering
  • ❤【Excellent Heat dissipation】 TMC2208 silent driver has a large-area cooling position to lower the temperature even stepper driver is working last for a long time.
  • ❤【Ultra Silent Step Driver 】TMC2208 stepper motor driver adopts stealthChop ultra-quiet technology which can driver the motor to work under extreme silence.
  • ❤【After-Sale Guarantee】We offer long-term after-sales guaranteed time for 1 2 months, If you have difficulties in using our step driver or other questions, please let me know what help you need, we are here ready to support you.
Rank No. #2
Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D
  • Integrate 2560 and Ramps1.4 one PCB,which designed to avoid complicated connections, easier wiring and more stable Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Run Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage.
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines.
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual adjustment of the current to cause the burned drive, convenient, safe and reliable.
Rank No. #3
MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories
  • 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like.
  • Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t.
  • Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2.
  • Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4.
  • Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.
Rank No. #4
KINGPRINT MKS Gen V1.4 Controller Board+5PCS DRV8825 Stepper Motor Mega 2560 Motherboard RepRap Ramps1.4 Compatible +USB Cable for 3D Printer
  • The firmware can use open source firmware Marlin, ramps1.4 identical configuration and can directly replace Ramps1.4.
  • Reserved for motor pulse and direction output ports for easy plug-in high-current To add a large current (eg 2A, 5A) motor drive circuit.
  • Reserved Ramps1.4 on Servos, AUX-1, AUX-2 interface that provides three 5V output, three 12V outputs.
  • The circuit board with high-quality 4-layer, heat and made a special optimization; ramps are 2 shelves.
  • Can accept 24V input power under the same system can be hot-bed current is reduced to 1/4, an effective solution to the hot bed MOS pipe heat problems.
SaleRank No. #5
KOOBOOK 1Pcs 3D Printer Control Board Controller PCB Board MKS Gen L V1.0 Integrate Ramps Motherboard 12/24V
  • 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support 4988 drive and 8825 drive, TMC2100 drive.
  • Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly.
  • 24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem.
  • It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 and TFT32 touch screen.
  • The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive.
Rank No. #6
[Pack of 5pcs] 3D Printer Part Stepstick Mute TMC2208 V3.0 Stepper Motor Driver with Heatsink for SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 3D Printer Control Board(UART Mode)
  • Good Heat Dissipation,large heat dissipation area, good heat dissipation effect.
  • The motor current can be set arbitrarily via firmware;
  • The microsteps can be set arbitrarily via firmware (up to 256 actual microsteps).
  • The actual and interpolated microsteps can be combined to achieve maximum torque.
  • The firmware can dynamically switch the stepper motor between stealthChop2 and SpreadCycle mode via UART. If the engine is not moving, the engine standby power can be dynamically reduced (via the UART).
Rank No. #7
BIGTREETECH Mini UPS V2.0 Power Off Resume Print Upgrade Module for SKR V1.3 SKR PRo MKS Gen L 3D Printer Controller Board
  • 1.【Product name】: MINI UPS_V2.0
  • 2.【Working Voltage】: 12V, maximum current: 25A
  • 3.【Notice】: It can only work normally at 12V voltage. When the working voltage is higher than 13V, the module will burn out. When the working voltage is lower than 10V, the module will output the power-off signal.
  • 4.【Notice2】:2.Do not reverse the positive or negative, otherwise it will burn the module
  • 5.【Instruction Manual】: For atmega2560 and other chips operating at 5V motherboard (for example: SKR PRO ,SKR V1.3, GEN_V1.0, KFB3.0), the module's toggle switch is set to 5V, for lpc1768 and other chips operating voltage of 3.3V motherboard (example :MKS SBase), turn the toggle switch to 3.3V.
Rank No. #8
BZ 3D TMC2209 V2.0 Stepper Motor Driver 2.5A UART Ultra Silent for MKS SGen L V1.0/Gen L V2.0 /Robin E3D/SKR 1.3/1.4 Support Sensorless-Homing Function (5 PCS)
  • ★TMC2209 have all function of TMC2208,can completely replace tmc2208. At the same time,tmc2209 have better heat dissipation,support bigger current,support sensorless-homing function.
  • ★Continuing the characteristics of the TMC series driver, the mute effect is good, Inside the chip 16, Maximum segmentation: 256 segments .
  • ★Larger driver current, maximum current is up to 2.5A and stable printing current is up to 1.8A.
  • ★Compared with other brand TMC series drives, our drive has better cooling effect.
  • ★Support UART Mode You Can use UART Mode in MKS SGEN L V1.0 / MKS GEN L V2.0 / MKS Robin E3D, SKR 1.3 / 1.4 by setting jumper cap. (No jumper is needed, no welding drive is required, and it is more convenient to use) This function does not support MKS GEN L V1.0
Rank No. #9
4PCS 3D Printer TMC2209 V3.0 Stepper Motor Driver, TMC2209 Stepper Driver Module with Heat Sink Mute Drive 256 Microsteps for 3D Printer Controller Boards SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6
  • TMC2209 V3.0 is a super mute two-phase stepper motor drive chip, drive capability up to 1.7A (RMS) continuous coil current - 2.8A Peak.
  • The flexible microstep interpolation unit can provide up to 256 subdivision, even in a system with limited pulse frequency, sine control can be perfectly realized.
  • TMC2209 V3.0 stepper motor driver compatible with StepStick and Pololu A4988.
  • With standard Step/dir interface,configuration via CFG pins or UART interface, it is simple and convenient to use.
  • The motor controlled by the PWM chopper mode operated more smoothly and Avoid losing steps and Jittering.
Rank No. #10
3D Printer MKS Gen-L V1.0 Controller Board, MKS Integrated Mainboard Motherboard Compatible with Ramps1.4, Supports TMC2100 A4988 8825 Driver, LCD2004 LCD12864 TFT28 TFT32
  • 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like.
  • Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage. Use high-quality MOSFET, better cooling effect and more stable.
  • Use CH340 serial port chip, more easily install the drive than 16U2. Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.
  • Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4. Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32.
  • Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board damage.

Last update on 2021-10-06 / Affiliate links / Product Titles, Images and Descriptions from Amazon Product Advertising API

Top Rated Mks Gen V1.3 to Buy Now

 

Why You Should Buy Best Mks Gen V1.3 from Amazon

Amazon is not the only store that sell Mks Gen V1.3. However, there are several compelling reasons why you should buy Mks Gen V1.3 from them, with the suitable Price and Reviews. Here are five:

(1) Amazon Makes Shopping Mks Gen V1.3 Personal

Amazon is very good at making recommendations of Mks Gen V1.3 based on your search history. From time to time, they will even show you discounted prices on Mks Gen V1.3 that you previously expressed an interest in. They also make your shopping experience a little easier by showing you items that you recently viewed.

(2) Amazon Checkout is Easy

Amazon checkout is easy, especially if you already have an account. You can add Mks Gen V1.3 to your cart and go through a multi-step checkout process, or you can buy Mks Gen V1.3 with only one click by using your stored credit card information.

(3) Amazon Has Lots of Social Proof

Before you make a purchase for Mks Gen V1.3, you want to know that the company you are dealing with is legitimate and that others trust the company enough to make a purchase. You may also like to read what others are saying about the product in the review section. Amazon does all of this quite well.

(4) Amazon Has Great Mks Gen V1.3 Images and Descriptions

In addition to still images, many of Amazon’s Mks Gen V1.3 have videos. This makes it easier for you to see exactly what you are purchasing. Amazon’s Mks Gen V1.3 descriptions are also quite good. In many cases, Amazon repeats the descriptions furnished by the manufacturer. In other cases, they write their own.

(5) The Amazon Site is Easy to Navigate

Navigating the Amazon site is easy. Even though the site is huge, you will not feel overwhelmed when searching for Mks Gen V1.3. This is partly due to Amazon’s filtering process. You can search for items by brand, price or user rating. You can also search for specific features.

How to Choose the Best Mks Gen V1.3 (with Price and Reviews)

Although most Mks Gen V1.3 are similar, there are several differences worth noting. Here are nine criteria to consider when choosing an Mks Gen V1.3:

(1) Mks Gen V1.3 Price and Reviews

Although price is not the only factor to consider, it is nevertheless extremely important. The price of an Mks Gen V1.3 should be in line with its value. You can compare Mks Gen V1.3 reviews to make sure you are getting a fair price. This is easy to do on Amazon.

(2) Demand

The demand for a particular Mks Gen V1.3 is a good indication of its ability to perform the functions for which it was designed. If a product has been around for a while and still has a high demand, it is likely a good product.

(3) Material

Mks Gen V1.3 materials differ from manufacturer to manufacturer. Consider where and how you will be using your Mks Gen V1.3 to determine if one material would be better than another.

(4) Size

Like most products, Mks Gen V1.3s come in various sizes. Do you need a large Mks Gen V1.3or a small one? Think about where you will use your Mks Gen V1.3 in order to determine the best size. You can also read the customer reviews on Amazon to see what others are saying about the size of the unit they purchased.

(5) Color

Mks Gen V1.3s also come in a variety of colors. Do you need a particular color? You should also consider whether the color of your Mks Gen V1.3 would have any effect on the efficiency of its operation.

(6) Durability

The durability of an Mks Gen V1.3 will be contingent on the materials used as well as the quality of the manufacturing process. Additionally, the type of Mks Gen V1.3 you purchase may affect its durability.

(7) Storage

Will you need to store your Mks Gen V1.3? If so, you should consider the size and weight of the Mks Gen V1.3to make sure that it can be stored properly. Also, give some consideration to the type of climate in which your Mks Gen V1.3 will be stored.

(8) Customer Ratings

Customer rating is one of the best criteria for choosing an Mks Gen V1.3. It is hard to know exactly how an Mks Gen V1.3 will perform until you get it home and try it out.

(9) Warranty

Make sure the Mks Gen V1.3 you are considering is backed by a good manufacturer’s warranty. If it isn’t, you might be better off with another ones.