We’ve spent hundreds of hours researching and comparing Mks Gen V1.4 of all specifications to find the best one for any need (or budget). Here are the results.

The Best Mks Gen V1.4 of 2020 – Top Rated & Reviewed

2,164 Reviews Scanned

Rank No. #1
KINGPRINT 3D Printer MKS Gen V1.4 Controller Board Mega 2560 R3 Motherboard RepRap Ramps1.4 Compatible with USB
  • Mega 2560 and ramps1.4 set on a board, to solve complicated Ramps1.4 combination of interfaces, the problem of failure prone.
  • Replace the motor drive, drive and support A4988 DRV8825 TMC2208 TMC2130 drive.
  • The circuit board with high-quality 4-layer, heat and made a special optimization; ramps are 2 shelves.
  • Using high-quality MOSFET, and better heat dissipation.
  • Using a dedicated power chip, support 12V-24V power input, the voltage converter chip to solve the heat problem Ramps.

Rank No. #2
KINGPRINT MKS Gen V1.4 Controller Board+5PCS DRV8825 Stepper Motor Mega 2560 Motherboard RepRap Ramps1.4 Compatible +USB Cable for 3D Printer
  • The firmware can use open source firmware Marlin, ramps1.4 identical configuration and can directly replace Ramps1.4.
  • Reserved for motor pulse and direction output ports for easy plug-in high-current To add a large current (eg 2A, 5A) motor drive circuit.
  • Reserved Ramps1.4 on Servos, AUX-1, AUX-2 interface that provides three 5V output, three 12V outputs.
  • The circuit board with high-quality 4-layer, heat and made a special optimization; ramps are 2 shelves.
  • Can accept 24V input power under the same system can be hot-bed current is reduced to 1/4, an effective solution to the hot bed MOS pipe heat problems.
Rank No. #3
MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS
  • ฅฅ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ฅฅ Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • ฅฅ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS
  • ฅฅ TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • ฅฅ Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces
Rank No. #4
Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D
  • Integrate 2560 and Ramps1.4 one PCB,which designed to avoid complicated connections, easier wiring and more stable Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Run Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage.
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines.
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual adjustment of the current to cause the burned drive, convenient, safe and reliable.
Rank No. #5
Aitrip 5pcs TMC2209 V3.0 Stepper Motor Driver for 3D Printer SKR V1.3 SKR with heatsink 256 Microsteps Current 2.8A Peak for Reprap Ramps1.4 MKS Gen Mainboard Parts (3pcs)
  • TMC2209 V3.0 Stepper Motor Driver is an ultra-quiet two-phase stepper motor drive chip
  • It can compatible with StepStick and Pololu A4988
  •  It can replace the original TMC2208, A4988, DRV8825, LV8729 and so on
  • Drive capability up to 1.7A (RMS) continuous coil current - 2.8A Peak
  • Step/Dir interface with microstep interpolation (up to 256 microsteps)
Rank No. #6
3D Printer MKS Gen-L V1.0 Controller Board, MKS Integrated Mainboard Motherboard Compatible with Ramps1.4, Supports TMC2100 A4988 8825 Driver, LCD2004 LCD12864 TFT28 TFT32
  • 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like.
  • Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage. Use high-quality MOSFET, better cooling effect and more stable.
  • Use CH340 serial port chip, more easily install the drive than 16U2. Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.
  • Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4. Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32.
  • Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board damage.
Rank No. #7
MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories
  • ❤ 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like.
  • ❤ Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t.
  • ❤ Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2.
  • ❤ Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4.
  • ❤ Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.
Rank No. #8
ShiSyan 3D Printer Parts MKS Gen V1.4 Control Board Mega 2560 R3 Motherboard RepRap Ramps1.4 +TMC2100/TMC2130 /TMC2208/DRV8825 Driver
  • We have commodity security services. If the product you received has quality problems, please feel free to contact us, we can provide you with a return service.
Rank No. #9
Zamtac TMC2130 V2.0 Stepper Motor Driver Silent SPI/DIR/STP MKS GEN V1.4 GEN L SKR V1.1 Board 3D Printer Parts 3D Printers - (Size: 4 PCS SPI)
  • Size: 4 PCS SPI
  • Item type: Motherboard
  • Model number: TMC2130 V2.0
  • Working mode: DIR/STP/SPI
  • Feature: Super Silent
Rank No. #10
Lasamot TFT35 V2.0 Intelligent Controller Display 3.5 Inch Touching Screen for SKR V1.3 MKS Gen V1.4 3D Printer Parts
  • 3.5 inch color touching screen for easy operation and clearer.
  • Can be used on most 3D printer motherboards.
  • ARM Cortex-M-3 series STM32F 103VCT6 master controller with 32-bit main frequency of 72MHz.
  • Support serial WiFi.
  • Support automatic shutdown after printing, filament break detection, power off resume print.

Last update on 2021-04-13 / Affiliate links / Product Titles, Images and Descriptions from Amazon Product Advertising API

Top Rated Mks Gen V1.4 to Buy Now

 

Why You Should Buy Best Mks Gen V1.4 from Amazon

Amazon is not the only store that sell Mks Gen V1.4. However, there are several compelling reasons why you should buy Mks Gen V1.4 from them, with the suitable Price and Reviews. Here are five:

(1) Amazon Makes Shopping Mks Gen V1.4 Personal

Amazon is very good at making recommendations of Mks Gen V1.4 based on your search history. From time to time, they will even show you discounted prices on Mks Gen V1.4 that you previously expressed an interest in. They also make your shopping experience a little easier by showing you items that you recently viewed.

(2) Amazon Checkout is Easy

Amazon checkout is easy, especially if you already have an account. You can add Mks Gen V1.4 to your cart and go through a multi-step checkout process, or you can buy Mks Gen V1.4 with only one click by using your stored credit card information.

(3) Amazon Has Lots of Social Proof

Before you make a purchase for Mks Gen V1.4, you want to know that the company you are dealing with is legitimate and that others trust the company enough to make a purchase. You may also like to read what others are saying about the product in the review section. Amazon does all of this quite well.

(4) Amazon Has Great Mks Gen V1.4 Images and Descriptions

In addition to still images, many of Amazon’s Mks Gen V1.4 have videos. This makes it easier for you to see exactly what you are purchasing. Amazon’s Mks Gen V1.4 descriptions are also quite good. In many cases, Amazon repeats the descriptions furnished by the manufacturer. In other cases, they write their own.

(5) The Amazon Site is Easy to Navigate

Navigating the Amazon site is easy. Even though the site is huge, you will not feel overwhelmed when searching for Mks Gen V1.4. This is partly due to Amazon’s filtering process. You can search for items by brand, price or user rating. You can also search for specific features.

How to Choose the Best Mks Gen V1.4 (with Price and Reviews)

Although most Mks Gen V1.4 are similar, there are several differences worth noting. Here are nine criteria to consider when choosing an Mks Gen V1.4:

(1) Mks Gen V1.4 Price and Reviews

Although price is not the only factor to consider, it is nevertheless extremely important. The price of an Mks Gen V1.4 should be in line with its value. You can compare Mks Gen V1.4 reviews to make sure you are getting a fair price. This is easy to do on Amazon.

(2) Demand

The demand for a particular Mks Gen V1.4 is a good indication of its ability to perform the functions for which it was designed. If a product has been around for a while and still has a high demand, it is likely a good product.

(3) Material

Mks Gen V1.4 materials differ from manufacturer to manufacturer. Consider where and how you will be using your Mks Gen V1.4 to determine if one material would be better than another.

(4) Size

Like most products, Mks Gen V1.4s come in various sizes. Do you need a large Mks Gen V1.4or a small one? Think about where you will use your Mks Gen V1.4 in order to determine the best size. You can also read the customer reviews on Amazon to see what others are saying about the size of the unit they purchased.

(5) Color

Mks Gen V1.4s also come in a variety of colors. Do you need a particular color? You should also consider whether the color of your Mks Gen V1.4 would have any effect on the efficiency of its operation.

(6) Durability

The durability of an Mks Gen V1.4 will be contingent on the materials used as well as the quality of the manufacturing process. Additionally, the type of Mks Gen V1.4 you purchase may affect its durability.

(7) Storage

Will you need to store your Mks Gen V1.4? If so, you should consider the size and weight of the Mks Gen V1.4to make sure that it can be stored properly. Also, give some consideration to the type of climate in which your Mks Gen V1.4 will be stored.

(8) Customer Ratings

Customer rating is one of the best criteria for choosing an Mks Gen V1.4. It is hard to know exactly how an Mks Gen V1.4 will perform until you get it home and try it out.

(9) Warranty

Make sure the Mks Gen V1.4 you are considering is backed by a good manufacturer’s warranty. If it isn’t, you might be better off with another ones.