We’ve spent hundreds of hours researching and comparing Solder Remover Wick of all specifications to find the best one for any need (or budget). Here are the results.

The Best Solder Remover Wick of 2020 – Top Rated & Reviewed

2,310 Reviews Scanned

Rank No. #1
NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length
  • Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
  • Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
  • 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
  • Available with standard or anti-static bobbins
Rank No. #2
Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover
  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
Rank No. #3
AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool
  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
Rank No. #4
Desoldering Wick & Desoldering Pump, Solder Sucker & Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering
  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
Rank No. #5
TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering
  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
Rank No. #6
MG Chemicals 425-NS #3 No Clean Super Wick Desoldering Braid, 0.075" Width x 5' Length, Green
  • Conforms to MIL-F-14256E RMA flux and J-STD-004
  • High purity, oxide-free copper
  • ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
  • Environmentally and PCB safe residues
  • NSF, Nonfood Compounds Program Listed P1, NSF Registration #144209
Rank No. #7
6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Blue, 0.1 Inch Width)
  • What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
Rank No. #8
OMorc Desoldering Wick, Solder Sucker & Solder Braid (2.5mm Width, 1.5m Length) – Desoldering Vacuum Pump Solder Removal Tool
  • Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
  • Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
  • Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
  • Compact and Lightweight. Measuring 7.48''X0.79'', the desoldering pump can be used with only one hand, either your right or left hand.
  • Solid Construction. The solder sucker has plastic backing to ensure stability.
Rank No. #9
5Pcs 1.5m Solder Wick Desoldering Braid Wire Solder Remover 1.5/2.0/2.5/3.0/3.5mm for Print Circuit Board Computer Motherboard Mobile Phone Board
  • Desoldering braid wire adopts high purity oxygen-free copper wire.
  • Solder remover has good effects of desoldering and tin suction, little remains.
  • Desoldering wire can quickly remove unwanted solder when used with a soldering iron.
  • Provide multiple width of solder wick for different desoldering requirements.
  • Solder wick is ideal for the desoldering of print circuit board, computer motherboard, mobile phone board, etc.

Last update on 2020-11-16 / Affiliate links / Product Titles, Images and Descriptions from Amazon Product Advertising API

Top Rated Solder Remover Wick to Buy Now

 

Why You Should Buy Best Solder Remover Wick from Amazon

Amazon is not the only store that sell Solder Remover Wick. However, there are several compelling reasons why you should buy Solder Remover Wick from them, with the suitable Price and Reviews. Here are five:

(1) Amazon Makes Shopping Solder Remover Wick Personal

Amazon is very good at making recommendations of Solder Remover Wick based on your search history. From time to time, they will even show you discounted prices on Solder Remover Wick that you previously expressed an interest in. They also make your shopping experience a little easier by showing you items that you recently viewed.

(2) Amazon Checkout is Easy

Amazon checkout is easy, especially if you already have an account. You can add Solder Remover Wick to your cart and go through a multi-step checkout process, or you can buy Solder Remover Wick with only one click by using your stored credit card information.

(3) Amazon Has Lots of Social Proof

Before you make a purchase for Solder Remover Wick, you want to know that the company you are dealing with is legitimate and that others trust the company enough to make a purchase. You may also like to read what others are saying about the product in the review section. Amazon does all of this quite well.

(4) Amazon Has Great Solder Remover Wick Images and Descriptions

In addition to still images, many of Amazon’s Solder Remover Wick have videos. This makes it easier for you to see exactly what you are purchasing. Amazon’s Solder Remover Wick descriptions are also quite good. In many cases, Amazon repeats the descriptions furnished by the manufacturer. In other cases, they write their own.

(5) The Amazon Site is Easy to Navigate

Navigating the Amazon site is easy. Even though the site is huge, you will not feel overwhelmed when searching for Solder Remover Wick. This is partly due to Amazon’s filtering process. You can search for items by brand, price or user rating. You can also search for specific features.

How to Choose the Best Solder Remover Wick (with Price and Reviews)

Although most Solder Remover Wick are similar, there are several differences worth noting. Here are nine criteria to consider when choosing an Solder Remover Wick:

(1) Solder Remover Wick Price and Reviews

Although price is not the only factor to consider, it is nevertheless extremely important. The price of an Solder Remover Wick should be in line with its value. You can compare Solder Remover Wick reviews to make sure you are getting a fair price. This is easy to do on Amazon.

(2) Demand

The demand for a particular Solder Remover Wick is a good indication of its ability to perform the functions for which it was designed. If a product has been around for a while and still has a high demand, it is likely a good product.

(3) Material

Solder Remover Wick materials differ from manufacturer to manufacturer. Consider where and how you will be using your Solder Remover Wick to determine if one material would be better than another.

(4) Size

Like most products, Solder Remover Wicks come in various sizes. Do you need a large Solder Remover Wickor a small one? Think about where you will use your Solder Remover Wick in order to determine the best size. You can also read the customer reviews on Amazon to see what others are saying about the size of the unit they purchased.

(5) Color

Solder Remover Wicks also come in a variety of colors. Do you need a particular color? You should also consider whether the color of your Solder Remover Wick would have any effect on the efficiency of its operation.

(6) Durability

The durability of an Solder Remover Wick will be contingent on the materials used as well as the quality of the manufacturing process. Additionally, the type of Solder Remover Wick you purchase may affect its durability.

(7) Storage

Will you need to store your Solder Remover Wick? If so, you should consider the size and weight of the Solder Remover Wickto make sure that it can be stored properly. Also, give some consideration to the type of climate in which your Solder Remover Wick will be stored.

(8) Customer Ratings

Customer rating is one of the best criteria for choosing an Solder Remover Wick. It is hard to know exactly how an Solder Remover Wick will perform until you get it home and try it out.

(9) Warranty

Make sure the Solder Remover Wick you are considering is backed by a good manufacturer’s warranty. If it isn’t, you might be better off with another ones.